Mobil 1™ ESP LV 0W-30
Advanced Full Synthetic Engine Oil
Mobil 1™ ESP LV 0W-30 is an advanced full synthetic engine oil specifically designed to provide outstanding performance.
Features and Benefits
|
Features |
Advantages and Potential Benefits |
|
Low viscosity, advanced full synthetic formulation |
Promotes engine efficiency and fuel economy |
|
Active cleaning agents |
Helps prevent sludge and deposits to keep engines clean |
|
Outstanding high temperature thermal and oxidative stability |
Resists oil breakdown to help provide long lasting protection |
|
Excellent low temperature capabilities |
Outstanding cold starting and fast lubrication to protect against wear |
|
Precise balance of performance additives |
Excellent overall lubrication and wear protection |
Applications
Mobil 1 ESP LV 0W-30 is designed for modern high efficiency gasoline, diesel and hybrid cars from BMW,Volvo and Mercedes-Benz as well as for Japanese and Korean vehicles that specifically call for a SAE 0W-30 viscosity grade and any of the specifications the oil supports, allowing for extended oil change intervals where recommended by the manufacturer.
• Mobil 1 ESP LV 0W-30 based on Mobil low ash synthetic technology meets or exceeds ACEA C2 industry standard to contribute to engine fuel efficiency, and to help protect exhaust gas after-treatment systems designed to limit engine emissions.
• Mobil 1 ESP LV 0W-30 is not recommended for 2-Cycle or aviation engines, unless specifically approved by the manufacturer.
Owner's manual should be consulted for recommended viscosity grade and specification.
Specifications and Approvals
|
This product has the following approvals: |
|
BMW Longlife 12 FE |
|
VOLVO 95200377 |
|
MB-Approval 229.61 |
|
This product is recommended for use in applications requiring: |
|
FORD WSS-M2C920-A Engine Test Requirements |
|
This product meets or exceeds the requirements of: |
|
API SN Engine Test Requirements |
|
API SL |
|
ACEA C2 |
|
ACEA A5/B5 |
Properties and Specifications
|
Property |
|
|
Grade |
SAE 0W-30 |
|
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 |
9.7 |
|
Viscosity Index, ASTM D2270 |
180 |
|
Ash, Sulfated, mass%, ASTM D874 |
0.8 |
|
Hi-Temp Hi-Shear Viscosity @ 150 C, mPa.s, ASTM D4683 |
3.0 |
|
Pour Point, °C, ASTM D97 |
-51 |
|
Flash Point, °C, ASTM D93 |
200 |
|
Density @ 15.6 C, g/cm3, ASTM D4052 |
0.8429 |
Health and safety
Health and Safety recommendations for this product can be found on the Material Safety Data Sheet (MSDS) @ http://www.msds.exxonmobil.com/psims/psims.aspx